Spray Paint PU moulding Medical Device Prototyping High Speed CNC
- prototype: CNC machining, materials for plastic , metal sheet.
- Mould: epoxy resin mold or ABS mold.
- Injection:RIM,the material is PU resin AXSON 875/900 - RIM, HD -
- Post-processing: sand blasting, spray paint.
- Inspection: tooling fixture, three coordinate measuring.
- Precision control
Shenzhen Strongd Model Technology company has introduced many sets
of Japan Fanuc, high speed
machining center equipment, the maximum speed of 24000 r/min, the
machining accuracy of + / - 0.05 mm.
Specially used in automotive, medical and other large pieces of
sample processing.Material is available in
ABS, PC, PP, PMMA, POM, nylon, aluminum alloy, magnesium alloy,
Under vacuum conditions in castable for deaeration, stirring,
preheating, note type, and at 60 ℃, 80 ℃ in the
constant temperature box of 2 to 3 hours of secondary curing
process. Suitable for small batch trial production
of the product development process, the structure is relatively
complex, uniform wall thickness, satisfy a certain
functional requirements of test samples.
Technical parameters :
Applicable mould: silicone mold life (10-20); resin mold (100);ABS
mould (more than 100).
Casting materials: a two-component polyurethane PU.
Properties: like ABS, PP, PMMA/PC transparent, soft rubber parts
shore (40-90), high temperature (150 ℃),
fire prevention materials and so on.
General working time: 1-4 hours/units
Standard replication accuracy: + / - 0.15 mm / 100 mm
Casting sample thickness: minimum 0.5 mm, best of 1.5 mm to 5 mm
The biggest casting workpiece: 2000 x1200x1000mm.
Service Step for a Project